Roadway Section
Navigation
Child Classes
Property Sets
- Roadway Section Information
- Longitudinal Joint Adhesive
- Roadway Section Layout
- Roadway Section Additional Features
- Roadway Section Performance Management
- Identification
- Alignment Data - Linear
- State Plane Coordinates - Linear
- LRS Data - Linear
- GPS Coordinates - Linear
- Roadway Section Layer Properties
- Tack or Prime Coat
- Pay Item Information
Applicability
This specification applies to all Roadway Sections. It also addresses the child class Top Layer. It also addresses the child class Base Layer. It also addresses the child class Subbase Layer. It also addresses the child class Subgrade Layer.
Child Classes
Top Layer
This child class inherits the requirements defined for the parent element.
Base Layer
This child class inherits the requirements defined for the parent element.
Subbase Layer
This child class inherits the requirements defined for the parent element.
Subgrade Layer
This child class inherits the requirements defined for the parent element.
Property Set: Roadway Section Information
| ID | Description | Type | Units | Cardinality |
|---|---|---|---|---|
roadway-section-id |
A unique identifier assigned to specific elements or features. | String | required | |
no-of-asphalt-pavement-layers |
The total quantity of distinct HMA courses within the pavement structure. | Integer | unitless | required |
no-of-portland-cement-concrete-pavement-layers |
The total quantity of distinct PCC courses within the pavement structure. | Integer | unitless | required |
no-of-aggregate-and-base-layers |
The total quantity of distinct loose stone courses within the pavement structure. | Integer | unitless | required |
Requirements
- All Roadway Sections must have the property Roadway Section ID in the set Roadway Section Information.
- All Roadway Sections must have the property No. of Asphalt Pavement Layers in the set Roadway Section Information.
- All Roadway Sections must have the property No. of Portland Cement Concrete Pavement Layers in the set Roadway Section Information.
- All Roadway Sections must have the property No. of Aggregate and Base Layers in the set Roadway Section Information.
Property Details
Roadway Section ID
A unique identifier assigned to specific elements or features. Requirement: All Roadway Sections must have the property Roadway Section ID in the set Roadway Section Information.
No. of Asphalt Pavement Layers
The total quantity of distinct HMA courses within the pavement structure. Requirement: All Roadway Sections must have the property No. of Asphalt Pavement Layers in the set Roadway Section Information.
No. of Portland Cement Concrete Pavement Layers
The total quantity of distinct PCC courses within the pavement structure. Requirement: All Roadway Sections must have the property No. of Portland Cement Concrete Pavement Layers in the set Roadway Section Information.
No. of Aggregate and Base Layers
The total quantity of distinct loose stone courses within the pavement structure. Requirement: All Roadway Sections must have the property No. of Aggregate and Base Layers in the set Roadway Section Information.
Property Set: Longitudinal Joint Adhesive
| ID | Description | Type | Units | Cardinality |
|---|---|---|---|---|
location |
Location of joint adhesive which could include Lane, Shoulder, or Curb | String | optional |
Requirements
- All Roadway Sections may have the property Location in the set Longitudinal Joint Adhesive.
Property Details
Location
Location of joint adhesive which could include Lane, Shoulder, or Curb Requirement: All Roadway Sections may have the property Location in the set Longitudinal Joint Adhesive.
Property Set: Roadway Section Layout
| ID | Description | Type | Units | Cardinality |
|---|---|---|---|---|
location-of-roadway-section |
Location of roadway section in terms of Lane or Shoulder | String | required | |
offset-from-lane-or-shoulder |
If Roadway Section start/end is offset from lane or shoulder edge | Boolean | required |
Requirements
- All Roadway Sections must have the property Location of Roadway Section in the set Roadway Section Layout with a value being one of Lane, Shoulder, Both.
- All Roadway Sections must have the property Offset from Lane or Shoulder in the set Roadway Section Layout with a value being one of Yes, No.
Property Details
Location of Roadway Section
Location of roadway section in terms of Lane or Shoulder Requirement: All Roadway Sections must have the property Location of Roadway Section in the set Roadway Section Layout with a value being one of Lane, Shoulder, Both.
Offset from Lane or Shoulder
If Roadway Section start/end is offset from lane or shoulder edge Requirement: All Roadway Sections must have the property Offset from Lane or Shoulder in the set Roadway Section Layout with a value being one of Yes, No.
Property Set: Roadway Section Additional Features
| ID | Description | Type | Units | Cardinality |
|---|---|---|---|---|
underdrain |
Drainage system designed to remove excess water from the subgrade and pavement structure of a roadway. | Boolean | required | |
geotextile-required |
Permeable fabric used in civil engineering and construction projects to enhance soil stability, provide erosion control, and aid in drainage. | Boolean | required |
Requirements
- All Roadway Sections must have the property Underdrain in the set Roadway Section Additional Features with a value being one of Yes, No.
- All Roadway Sections must have the property Geotextile Required in the set Roadway Section Additional Features with a value being one of Yes, No.
Property Details
Underdrain
Drainage system designed to remove excess water from the subgrade and pavement structure of a roadway. Requirement: All Roadway Sections must have the property Underdrain in the set Roadway Section Additional Features with a value being one of Yes, No.
Geotextile Required
Permeable fabric used in civil engineering and construction projects to enhance soil stability, provide erosion control, and aid in drainage. Requirement: All Roadway Sections must have the property Geotextile Required in the set Roadway Section Additional Features with a value being one of Yes, No.
Property Set: Roadway Section Performance Management
| ID | Description | Type | Units | Cardinality |
|---|---|---|---|---|
roughness-iri |
Standard for measuring the smoothness of a road’s surface. | Real | unitless | optional |
Requirements
- All Roadway Sections may have the property Roughness (IRI) in the set Roadway Section Performance Management.
Property Details
Roughness (IRI)
Standard for measuring the smoothness of a road’s surface. Requirement: All Roadway Sections may have the property Roughness (IRI) in the set Roadway Section Performance Management.
Property Set: Identification
| ID | Description | Type | Units | Cardinality |
|---|---|---|---|---|
object-id |
Unique ID assigned to each asset in database | String | required | |
feature-id |
Specific point, linear, and surface designation | String | optional | |
feature-description |
Specific point, linear, and surface detailed description | String | optional | |
survey-feature-code |
Short abbreviation surveyors use in the field to identify and describe physical features and data points encountered | String | optional |
Requirements
- All Roadway Sections must have the property Object ID in the set Identification.
- All Roadway Sections may have the property Feature ID in the set Identification.
- All Roadway Sections may have the property Feature Description in the set Identification.
- All Roadway Sections may have the property Survey Feature Code in the set Identification.
Property Details
Object ID
Unique ID assigned to each asset in database Synonyms: GUID Requirement: All Roadway Sections must have the property Object ID in the set Identification.
Feature ID
Specific point, linear, and surface designation Synonyms: Feature line, feature point, feature definition Requirement: All Roadway Sections may have the property Feature ID in the set Identification.
Feature Description
Specific point, linear, and surface detailed description Requirement: All Roadway Sections may have the property Feature Description in the set Identification.
Survey Feature Code
Short abbreviation surveyors use in the field to identify and describe physical features and data points encountered Requirement: All Roadway Sections may have the property Survey Feature Code in the set Identification.
Property Set: Alignment Data - Linear
| ID | Description | Type | Units | Cardinality |
|---|---|---|---|---|
alignment-id-reference |
Alignment ID that is referenced for element layout | String | required | |
corridor-id-reference |
Corridor ID that is referenced for element layout | String | required | |
station-begin |
Station of linear location - begin | Real | Stationing | required |
station-offset-begin |
Offset of linear location - begin | Real | Feet | required |
station-end |
Station of linear location - end | Real | Stationing | required |
station-offset-end |
Offset of linear location - end | Real | Feet | required |
reference-point-location |
Placement of point for offset (i.e. gutterline for traffic barrier feature) | String | required |
Requirements
- All Roadway Sections must have the property Alignment ID Reference in the set Alignment Data - Linear.
- All Roadway Sections must have the property Corridor ID Reference in the set Alignment Data - Linear.
- All Roadway Sections must have the property Station - Begin in the set Alignment Data - Linear.
- All Roadway Sections must have the property Station Offset - Begin in the set Alignment Data - Linear.
- All Roadway Sections must have the property Station - End in the set Alignment Data - Linear.
- All Roadway Sections must have the property Station Offset - End in the set Alignment Data - Linear.
- All Roadway Sections must have the property Reference Point Location in the set Alignment Data - Linear.
Property Details
Alignment ID Reference
Alignment ID that is referenced for element layout Requirement: All Roadway Sections must have the property Alignment ID Reference in the set Alignment Data - Linear.
Corridor ID Reference
Corridor ID that is referenced for element layout Requirement: All Roadway Sections must have the property Corridor ID Reference in the set Alignment Data - Linear.
Station - Begin
Station of linear location - begin Requirement: All Roadway Sections must have the property Station - Begin in the set Alignment Data - Linear.
Station Offset - Begin
Offset of linear location - begin Requirement: All Roadway Sections must have the property Station Offset - Begin in the set Alignment Data - Linear.
Station - End
Station of linear location - end Requirement: All Roadway Sections must have the property Station - End in the set Alignment Data - Linear.
Station Offset - End
Offset of linear location - end Requirement: All Roadway Sections must have the property Station Offset - End in the set Alignment Data - Linear.
Reference Point Location
Placement of point for offset (i.e. gutterline for traffic barrier feature) Requirement: All Roadway Sections must have the property Reference Point Location in the set Alignment Data - Linear.
Property Set: State Plane Coordinates - Linear
| ID | Description | Type | Units | Cardinality |
|---|---|---|---|---|
northing-begin |
The “Y” values of coordinates represented on a plane coordinate system - Begin (Linear) | Real | Feet | required |
easting-begin |
The “X” values of coordinates represented on a plane coordinate system - Begin (Linear) | Real | Feet | required |
northing-end |
The “Y” values of coordinates represented on a plane coordinate system - End (Linear) | Real | Feet | required |
easting-end |
The “X” values of coordinates represented on a plane coordinate system - End (Linear) | Real | Feet | required |
Requirements
- All Roadway Sections must have the property Northing - Begin in the set State Plane Coordinates - Linear.
- All Roadway Sections must have the property Easting - Begin in the set State Plane Coordinates - Linear.
- All Roadway Sections must have the property Northing - End in the set State Plane Coordinates - Linear.
- All Roadway Sections must have the property Easting - End in the set State Plane Coordinates - Linear.
Property Details
Northing - Begin
The “Y” values of coordinates represented on a plane coordinate system - Begin (Linear) Requirement: All Roadway Sections must have the property Northing - Begin in the set State Plane Coordinates - Linear.
Easting - Begin
The “X” values of coordinates represented on a plane coordinate system - Begin (Linear) Requirement: All Roadway Sections must have the property Easting - Begin in the set State Plane Coordinates - Linear.
Northing - End
The “Y” values of coordinates represented on a plane coordinate system - End (Linear) Requirement: All Roadway Sections must have the property Northing - End in the set State Plane Coordinates - Linear.
Easting - End
The “X” values of coordinates represented on a plane coordinate system - End (Linear) Requirement: All Roadway Sections must have the property Easting - End in the set State Plane Coordinates - Linear.
Property Set: LRS Data - Linear
| ID | Description | Type | Units | Cardinality |
|---|---|---|---|---|
postmile-begin |
Mile post of point location - begin | Real | Mile | optional |
lrs-offset-begin |
Linear Reference System offset of point location - begin | Real | Feet | optional |
postmile-end |
Mile post of point location - end | Real | Mile | optional |
lrs-offset-end |
Linear Reference System offset of point location - end | Real | Feet | optional |
Requirements
- All Roadway Sections may have the property Postmile - Begin in the set LRS Data - Linear.
- All Roadway Sections may have the property LRS Offset - Begin in the set LRS Data - Linear.
- All Roadway Sections may have the property Postmile - End in the set LRS Data - Linear.
- All Roadway Sections may have the property LRS Offset - End in the set LRS Data - Linear.
Property Details
Postmile - Begin
Mile post of point location - begin Requirement: All Roadway Sections may have the property Postmile - Begin in the set LRS Data - Linear.
LRS Offset - Begin
Linear Reference System offset of point location - begin Requirement: All Roadway Sections may have the property LRS Offset - Begin in the set LRS Data - Linear.
Postmile - End
Mile post of point location - end Requirement: All Roadway Sections may have the property Postmile - End in the set LRS Data - Linear.
LRS Offset - End
Linear Reference System offset of point location - end Requirement: All Roadway Sections may have the property LRS Offset - End in the set LRS Data - Linear.
Property Set: GPS Coordinates - Linear
| ID | Description | Type | Units | Cardinality |
|---|---|---|---|---|
latitude-begin |
Latitude of linear location - begin | Real | optional | |
longitude-begin |
Longitude of point location - begin | Real | optional | |
latitude-end |
Latitude of linear location - end | Real | optional | |
longitude-end |
Longitude of point location - end | Real | optional | |
control-points-or-benchmarks |
Reference points with known coordinates and/or elevations, used to create a consistent horizontal and vertical datums for accurate coordination of highway right of way and private property boundaries and existing features for construction projects. | String | optional | |
gps-notes |
Notes referring to GPS location data | String | optional |
Requirements
- All Roadway Sections may have the property Latitude - Begin in the set GPS Coordinates - Linear.
- All Roadway Sections may have the property Longitude - Begin in the set GPS Coordinates - Linear.
- All Roadway Sections may have the property Latitude - End in the set GPS Coordinates - Linear.
- All Roadway Sections may have the property Longitude - End in the set GPS Coordinates - Linear.
- All Roadway Sections may have the property Control Points or Benchmarks in the set GPS Coordinates - Linear.
- All Roadway Sections may have the property GPS Notes in the set GPS Coordinates - Linear.
Property Details
Latitude - Begin
Latitude of linear location - begin Requirement: All Roadway Sections may have the property Latitude - Begin in the set GPS Coordinates - Linear.
Longitude - Begin
Longitude of point location - begin Requirement: All Roadway Sections may have the property Longitude - Begin in the set GPS Coordinates - Linear.
Latitude - End
Latitude of linear location - end Requirement: All Roadway Sections may have the property Latitude - End in the set GPS Coordinates - Linear.
Longitude - End
Longitude of point location - end Requirement: All Roadway Sections may have the property Longitude - End in the set GPS Coordinates - Linear.
Control Points or Benchmarks
Reference points with known coordinates and/or elevations, used to create a consistent horizontal and vertical datums for accurate coordination of highway right of way and private property boundaries and existing features for construction projects. Requirement: All Roadway Sections may have the property Control Points or Benchmarks in the set GPS Coordinates - Linear.
GPS Notes
Notes referring to GPS location data Requirement: All Roadway Sections may have the property GPS Notes in the set GPS Coordinates - Linear.
Property Set: Roadway Section Layer Properties
| ID | Description | Type | Units | Cardinality |
|---|---|---|---|---|
roadway-section-layer-id |
Individual pavement section layer identification. | String | required | |
roadway-section-layer-description |
Individual pavement section layer description. | String | required | |
asphalt-cement-performance-grade |
A type of asphalt binder that categorized based on it’s performance at different temperatures. | String | optional | |
water-cement-ratio |
The ratio of the weight of water to the weight of cement used in a concrete mix. | Real | unitless | optional |
friction-resistance |
The force developed at the interface between a pavement surface and a traveling vehicle’s tire. | Real | unitless | optional |
minimum-thickness |
The smallest allowable measurement for a layer in a pavement structure. | Real | inches | required |
uniform-depth |
The vertical depth uniformity of each layer, which can either be consistent throughout or vary at different locations. | Boolean | required | |
leveling-layer |
A material placed to correct surface irregularities and provide a smooth base for subsequent materials. | Boolean | required | |
roadway-section-layer-id-8 |
Individual pavement section layer identification. | String | required | |
roadway-section-layer-description-9 |
Individual pavement section layer description. | String | required | |
asphalt-cement-performance-grade-10 |
A type of asphalt binder that categorized based on it’s performance at different temperatures. | String | optional | |
water-cement-ratio-11 |
The ratio of the weight of water to the weight of cement used in a concrete mix. | Real | unitless | optional |
friction-resistance-12 |
The force developed at the interface between a pavement surface and a traveling vehicle’s tire. | Real | unitless | optional |
minimum-thickness-13 |
The smallest allowable measurement for a layer in a pavement structure. | Real | inches | required |
uniform-depth-14 |
The vertical depth uniformity of each layer, which can either be consistent throughout or vary at different locations. | Boolean | required | |
leveling-layer-15 |
A material placed to correct surface irregularities and provide a smooth base for subsequent materials. | Boolean | required | |
roadway-section-layer-id-16 |
Individual pavement section layer identification. | String | required | |
roadway-section-layer-description-17 |
Individual pavement section layer description. | String | required | |
asphalt-cement-performance-grade-18 |
A type of asphalt binder that categorized based on it’s performance at different temperatures. | String | optional | |
water-cement-ratio-19 |
The ratio of the weight of water to the weight of cement used in a concrete mix. | Real | unitless | optional |
friction-resistance-20 |
The force developed at the interface between a pavement surface and a traveling vehicle’s tire. | Real | unitless | optional |
minimum-thickness-21 |
The smallest allowable measurement for a layer in a pavement structure. | Real | inches | required |
uniform-depth-22 |
The vertical depth uniformity of each layer, which can either be consistent throughout or vary at different locations. | Boolean | required | |
leveling-layer-23 |
A material placed to correct surface irregularities and provide a smooth base for subsequent materials. | Boolean | required | |
roadway-section-layer-id-24 |
Individual pavement section layer identification. | String | required | |
roadway-section-layer-description-25 |
Individual pavement section layer description. | String | required | |
asphalt-cement-performance-grade-26 |
A type of asphalt binder that categorized based on it’s performance at different temperatures. | String | optional | |
water-cement-ratio-27 |
The ratio of the weight of water to the weight of cement used in a concrete mix. | Real | unitless | optional |
friction-resistance-28 |
The force developed at the interface between a pavement surface and a traveling vehicle’s tire. | Real | unitless | optional |
minimum-thickness-29 |
The smallest allowable measurement for a layer in a pavement structure. | Real | inches | required |
uniform-depth-30 |
The vertical depth uniformity of each layer, which can either be consistent throughout or vary at different locations. | Boolean | required | |
leveling-layer-31 |
A material placed to correct surface irregularities and provide a smooth base for subsequent materials. | Boolean | required |
Requirements
- All Top Layers must have the property Roadway Section Layer ID in the set Roadway Section Layer Properties.
- All Top Layers must have the property Roadway Section Layer Description in the set Roadway Section Layer Properties.
- All Top Layers may have the property Asphalt Cement / Performance Grade in the set Roadway Section Layer Properties.
- All Top Layers may have the property Water/Cement Ratio in the set Roadway Section Layer Properties.
- All Top Layers may have the property Friction Resistance in the set Roadway Section Layer Properties.
- All Top Layers must have the property Minimum Thickness in the set Roadway Section Layer Properties.
- All Top Layers must have the property Uniform Depth in the set Roadway Section Layer Properties with a value being one of Yes, No.
- All Top Layers must have the property Leveling Layer in the set Roadway Section Layer Properties with a value being one of Yes, No.
- All Top Layers must have the property Roadway Section Layer ID in the set Roadway Section Layer Properties.
- All Top Layers must have the property Roadway Section Layer Description in the set Roadway Section Layer Properties.
- All Top Layers may have the property Asphalt Cement / Performance Grade in the set Roadway Section Layer Properties.
- All Top Layers may have the property Water/Cement Ratio in the set Roadway Section Layer Properties.
- All Top Layers may have the property Friction Resistance in the set Roadway Section Layer Properties.
- All Top Layers must have the property Minimum Thickness in the set Roadway Section Layer Properties.
- All Top Layers must have the property Uniform Depth in the set Roadway Section Layer Properties with a value being one of Yes, No.
- All Top Layers must have the property Leveling Layer in the set Roadway Section Layer Properties with a value being one of Yes, No.
- All Top Layers must have the property Roadway Section Layer ID in the set Roadway Section Layer Properties.
- All Top Layers must have the property Roadway Section Layer Description in the set Roadway Section Layer Properties.
- All Top Layers may have the property Asphalt Cement / Performance Grade in the set Roadway Section Layer Properties.
- All Top Layers may have the property Water/Cement Ratio in the set Roadway Section Layer Properties.
- All Top Layers may have the property Friction Resistance in the set Roadway Section Layer Properties.
- All Top Layers must have the property Minimum Thickness in the set Roadway Section Layer Properties.
- All Top Layers must have the property Uniform Depth in the set Roadway Section Layer Properties with a value being one of Yes, No.
- All Top Layers must have the property Leveling Layer in the set Roadway Section Layer Properties with a value being one of Yes, No.
- All Top Layers must have the property Roadway Section Layer ID in the set Roadway Section Layer Properties.
- All Top Layers must have the property Roadway Section Layer Description in the set Roadway Section Layer Properties.
- All Top Layers may have the property Asphalt Cement / Performance Grade in the set Roadway Section Layer Properties.
- All Top Layers may have the property Water/Cement Ratio in the set Roadway Section Layer Properties.
- All Top Layers may have the property Friction Resistance in the set Roadway Section Layer Properties.
- All Top Layers must have the property Minimum Thickness in the set Roadway Section Layer Properties.
- All Top Layers must have the property Uniform Depth in the set Roadway Section Layer Properties with a value being one of Yes, No.
- All Top Layers must have the property Leveling Layer in the set Roadway Section Layer Properties with a value being one of Yes, No.
Property Details
Roadway Section Layer ID
Individual pavement section layer identification. Requirement: All Top Layers must have the property Roadway Section Layer ID in the set Roadway Section Layer Properties.
Roadway Section Layer Description
Individual pavement section layer description. Requirement: All Top Layers must have the property Roadway Section Layer Description in the set Roadway Section Layer Properties.
Asphalt Cement / Performance Grade
A type of asphalt binder that categorized based on it’s performance at different temperatures. Requirement: All Top Layers may have the property Asphalt Cement / Performance Grade in the set Roadway Section Layer Properties.
Water/Cement Ratio
The ratio of the weight of water to the weight of cement used in a concrete mix. Requirement: All Top Layers may have the property Water/Cement Ratio in the set Roadway Section Layer Properties.
Friction Resistance
The force developed at the interface between a pavement surface and a traveling vehicle’s tire. Requirement: All Top Layers may have the property Friction Resistance in the set Roadway Section Layer Properties.
Minimum Thickness
The smallest allowable measurement for a layer in a pavement structure. Requirement: All Top Layers must have the property Minimum Thickness in the set Roadway Section Layer Properties.
Uniform Depth
The vertical depth uniformity of each layer, which can either be consistent throughout or vary at different locations. Requirement: All Top Layers must have the property Uniform Depth in the set Roadway Section Layer Properties with a value being one of Yes, No.
Leveling Layer
A material placed to correct surface irregularities and provide a smooth base for subsequent materials. Requirement: All Top Layers must have the property Leveling Layer in the set Roadway Section Layer Properties with a value being one of Yes, No.
Roadway Section Layer ID
Individual pavement section layer identification. Requirement: All Top Layers must have the property Roadway Section Layer ID in the set Roadway Section Layer Properties.
Roadway Section Layer Description
Individual pavement section layer description. Requirement: All Top Layers must have the property Roadway Section Layer Description in the set Roadway Section Layer Properties.
Asphalt Cement / Performance Grade
A type of asphalt binder that categorized based on it’s performance at different temperatures. Requirement: All Top Layers may have the property Asphalt Cement / Performance Grade in the set Roadway Section Layer Properties.
Water/Cement Ratio
The ratio of the weight of water to the weight of cement used in a concrete mix. Requirement: All Top Layers may have the property Water/Cement Ratio in the set Roadway Section Layer Properties.
Friction Resistance
The force developed at the interface between a pavement surface and a traveling vehicle’s tire. Requirement: All Top Layers may have the property Friction Resistance in the set Roadway Section Layer Properties.
Minimum Thickness
The smallest allowable measurement for a layer in a pavement structure. Requirement: All Top Layers must have the property Minimum Thickness in the set Roadway Section Layer Properties.
Uniform Depth
The vertical depth uniformity of each layer, which can either be consistent throughout or vary at different locations. Requirement: All Top Layers must have the property Uniform Depth in the set Roadway Section Layer Properties with a value being one of Yes, No.
Leveling Layer
A material placed to correct surface irregularities and provide a smooth base for subsequent materials. Requirement: All Top Layers must have the property Leveling Layer in the set Roadway Section Layer Properties with a value being one of Yes, No.
Roadway Section Layer ID
Individual pavement section layer identification. Requirement: All Top Layers must have the property Roadway Section Layer ID in the set Roadway Section Layer Properties.
Roadway Section Layer Description
Individual pavement section layer description. Requirement: All Top Layers must have the property Roadway Section Layer Description in the set Roadway Section Layer Properties.
Asphalt Cement / Performance Grade
A type of asphalt binder that categorized based on it’s performance at different temperatures. Requirement: All Top Layers may have the property Asphalt Cement / Performance Grade in the set Roadway Section Layer Properties.
Water/Cement Ratio
The ratio of the weight of water to the weight of cement used in a concrete mix. Requirement: All Top Layers may have the property Water/Cement Ratio in the set Roadway Section Layer Properties.
Friction Resistance
The force developed at the interface between a pavement surface and a traveling vehicle’s tire. Requirement: All Top Layers may have the property Friction Resistance in the set Roadway Section Layer Properties.
Minimum Thickness
The smallest allowable measurement for a layer in a pavement structure. Requirement: All Top Layers must have the property Minimum Thickness in the set Roadway Section Layer Properties.
Uniform Depth
The vertical depth uniformity of each layer, which can either be consistent throughout or vary at different locations. Requirement: All Top Layers must have the property Uniform Depth in the set Roadway Section Layer Properties with a value being one of Yes, No.
Leveling Layer
A material placed to correct surface irregularities and provide a smooth base for subsequent materials. Requirement: All Top Layers must have the property Leveling Layer in the set Roadway Section Layer Properties with a value being one of Yes, No.
Roadway Section Layer ID
Individual pavement section layer identification. Requirement: All Top Layers must have the property Roadway Section Layer ID in the set Roadway Section Layer Properties.
Roadway Section Layer Description
Individual pavement section layer description. Requirement: All Top Layers must have the property Roadway Section Layer Description in the set Roadway Section Layer Properties.
Asphalt Cement / Performance Grade
A type of asphalt binder that categorized based on it’s performance at different temperatures. Requirement: All Top Layers may have the property Asphalt Cement / Performance Grade in the set Roadway Section Layer Properties.
Water/Cement Ratio
The ratio of the weight of water to the weight of cement used in a concrete mix. Requirement: All Top Layers may have the property Water/Cement Ratio in the set Roadway Section Layer Properties.
Friction Resistance
The force developed at the interface between a pavement surface and a traveling vehicle’s tire. Requirement: All Top Layers may have the property Friction Resistance in the set Roadway Section Layer Properties.
Minimum Thickness
The smallest allowable measurement for a layer in a pavement structure. Requirement: All Top Layers must have the property Minimum Thickness in the set Roadway Section Layer Properties.
Uniform Depth
The vertical depth uniformity of each layer, which can either be consistent throughout or vary at different locations. Requirement: All Top Layers must have the property Uniform Depth in the set Roadway Section Layer Properties with a value being one of Yes, No.
Leveling Layer
A material placed to correct surface irregularities and provide a smooth base for subsequent materials. Requirement: All Top Layers must have the property Leveling Layer in the set Roadway Section Layer Properties with a value being one of Yes, No.
Property Set: Tack or Prime Coat
| ID | Description | Type | Units | Cardinality |
|---|---|---|---|---|
coat-layer-id |
A unique identifier assigned to specific binder. | String | optional | |
coat-type |
Categorization based on the material composition and application method. | String | optional | |
between-layer-names |
The specific labels assigned to the features that separate different pavement courses. | String | optional | |
rate-of-spray-range-min |
The specified quantity of material applied per unit area. | Real | gallons/square yard | optional |
rate-of-spray-range-max |
The space or extent included. | Real | gallons/square yard | optional |
asphalt-emulsion |
Liquid asphalt cement emulsified in water. | String | optional | |
coat-layer-id-6 |
A unique identifier assigned to specific binder. | String | optional | |
coat-type-7 |
Categorization based on the material composition and application method. | String | optional | |
between-layer-names-8 |
The specific labels assigned to the features that separate different pavement courses. | String | optional | |
rate-of-spray-range-min-9 |
The specified quantity of material applied per unit area. | Real | gallons/square yard | optional |
rate-of-spray-range-max-10 |
The space or extent included. | Real | gallons/square yard | optional |
asphalt-emulsion-11 |
Liquid asphalt cement emulsified in water. | String | optional | |
coat-layer-id-12 |
A unique identifier assigned to specific binder. | String | optional | |
coat-type-13 |
Categorization based on the material composition and application method. | String | optional | |
between-layer-names-14 |
The specific labels assigned to the features that separate different pavement courses. | String | optional | |
rate-of-spray-range-min-15 |
The specified quantity of material applied per unit area. | Real | gallons/square yard | optional |
rate-of-spray-range-max-16 |
The space or extent included. | Real | gallons/square yard | optional |
asphalt-emulsion-17 |
Liquid asphalt cement emulsified in water. | String | optional | |
coat-layer-id-18 |
A unique identifier assigned to specific binder. | String | optional | |
coat-type-19 |
Categorization based on the material composition and application method. | String | optional | |
between-layer-names-20 |
The specific labels assigned to the features that separate different pavement courses. | String | optional | |
rate-of-spray-range-min-21 |
The specified quantity of material applied per unit area. | Real | gallons/square yard | optional |
rate-of-spray-range-max-22 |
The space or extent included. | Real | gallons/square yard | optional |
asphalt-emulsion-23 |
Liquid asphalt cement emulsified in water. | String | optional |
Requirements
- All Top Layers may have the property Coat Layer ID in the set Tack or Prime Coat.
- All Top Layers may have the property Coat Type in the set Tack or Prime Coat.
- All Top Layers may have the property Between Layer Names in the set Tack or Prime Coat.
- All Top Layers may have the property Rate of Spray Range-Min in the set Tack or Prime Coat.
- All Top Layers may have the property Rate of Spray Range-Max in the set Tack or Prime Coat.
- All Top Layers may have the property Asphalt Emulsion in the set Tack or Prime Coat.
- All Top Layers may have the property Coat Layer ID in the set Tack or Prime Coat.
- All Top Layers may have the property Coat Type in the set Tack or Prime Coat.
- All Top Layers may have the property Between Layer Names in the set Tack or Prime Coat.
- All Top Layers may have the property Rate of Spray Range-Min in the set Tack or Prime Coat.
- All Top Layers may have the property Rate of Spray Range-Max in the set Tack or Prime Coat.
- All Top Layers may have the property Asphalt Emulsion in the set Tack or Prime Coat.
- All Top Layers may have the property Coat Layer ID in the set Tack or Prime Coat.
- All Top Layers may have the property Coat Type in the set Tack or Prime Coat.
- All Top Layers may have the property Between Layer Names in the set Tack or Prime Coat.
- All Top Layers may have the property Rate of Spray Range-Min in the set Tack or Prime Coat.
- All Top Layers may have the property Rate of Spray Range-Max in the set Tack or Prime Coat.
- All Top Layers may have the property Asphalt Emulsion in the set Tack or Prime Coat.
- All Top Layers may have the property Coat Layer ID in the set Tack or Prime Coat.
- All Top Layers may have the property Coat Type in the set Tack or Prime Coat.
- All Top Layers may have the property Between Layer Names in the set Tack or Prime Coat.
- All Top Layers may have the property Rate of Spray Range-Min in the set Tack or Prime Coat.
- All Top Layers may have the property Rate of Spray Range-Max in the set Tack or Prime Coat.
- All Top Layers may have the property Asphalt Emulsion in the set Tack or Prime Coat.
Property Details
Coat Layer ID
A unique identifier assigned to specific binder. Requirement: All Top Layers may have the property Coat Layer ID in the set Tack or Prime Coat.
Coat Type
Categorization based on the material composition and application method. Requirement: All Top Layers may have the property Coat Type in the set Tack or Prime Coat.
Between Layer Names
The specific labels assigned to the features that separate different pavement courses. Requirement: All Top Layers may have the property Between Layer Names in the set Tack or Prime Coat.
Rate of Spray Range-Min
The specified quantity of material applied per unit area. Requirement: All Top Layers may have the property Rate of Spray Range-Min in the set Tack or Prime Coat.
Rate of Spray Range-Max
The space or extent included. Requirement: All Top Layers may have the property Rate of Spray Range-Max in the set Tack or Prime Coat.
Asphalt Emulsion
Liquid asphalt cement emulsified in water. Synonyms: tack coat material Requirement: All Top Layers may have the property Asphalt Emulsion in the set Tack or Prime Coat.
Coat Layer ID
A unique identifier assigned to specific binder. Requirement: All Top Layers may have the property Coat Layer ID in the set Tack or Prime Coat.
Coat Type
Categorization based on the material composition and application method. Requirement: All Top Layers may have the property Coat Type in the set Tack or Prime Coat.
Between Layer Names
The specific labels assigned to the features that separate different pavement courses. Requirement: All Top Layers may have the property Between Layer Names in the set Tack or Prime Coat.
Rate of Spray Range-Min
The specified quantity of material applied per unit area. Requirement: All Top Layers may have the property Rate of Spray Range-Min in the set Tack or Prime Coat.
Rate of Spray Range-Max
The space or extent included. Requirement: All Top Layers may have the property Rate of Spray Range-Max in the set Tack or Prime Coat.
Asphalt Emulsion
Liquid asphalt cement emulsified in water. Synonyms: tack coat material Requirement: All Top Layers may have the property Asphalt Emulsion in the set Tack or Prime Coat.
Coat Layer ID
A unique identifier assigned to specific binder. Requirement: All Top Layers may have the property Coat Layer ID in the set Tack or Prime Coat.
Coat Type
Categorization based on the material composition and application method. Requirement: All Top Layers may have the property Coat Type in the set Tack or Prime Coat.
Between Layer Names
The specific labels assigned to the features that separate different pavement courses. Requirement: All Top Layers may have the property Between Layer Names in the set Tack or Prime Coat.
Rate of Spray Range-Min
The specified quantity of material applied per unit area. Requirement: All Top Layers may have the property Rate of Spray Range-Min in the set Tack or Prime Coat.
Rate of Spray Range-Max
The space or extent included. Requirement: All Top Layers may have the property Rate of Spray Range-Max in the set Tack or Prime Coat.
Asphalt Emulsion
Liquid asphalt cement emulsified in water. Synonyms: tack coat material Requirement: All Top Layers may have the property Asphalt Emulsion in the set Tack or Prime Coat.
Coat Layer ID
A unique identifier assigned to specific binder. Requirement: All Top Layers may have the property Coat Layer ID in the set Tack or Prime Coat.
Coat Type
Categorization based on the material composition and application method. Requirement: All Top Layers may have the property Coat Type in the set Tack or Prime Coat.
Between Layer Names
The specific labels assigned to the features that separate different pavement courses. Requirement: All Top Layers may have the property Between Layer Names in the set Tack or Prime Coat.
Rate of Spray Range-Min
The specified quantity of material applied per unit area. Requirement: All Top Layers may have the property Rate of Spray Range-Min in the set Tack or Prime Coat.
Rate of Spray Range-Max
The space or extent included. Requirement: All Top Layers may have the property Rate of Spray Range-Max in the set Tack or Prime Coat.
Asphalt Emulsion
Liquid asphalt cement emulsified in water. Synonyms: tack coat material Requirement: All Top Layers may have the property Asphalt Emulsion in the set Tack or Prime Coat.
Property Set: Pay Item Information
| ID | Description | Type | Units | Cardinality |
|---|---|---|---|---|
pay-item-code |
The code used to describe the pay item often associated with construction standards or specifications developed by an owner agency. | String | required | |
pay-item-description |
A description of the pay item code. | String | required | |
pay-item-unit-of-measure |
The unit of measure associated with the pay item (LF, CY, LS, etc.). Use the unit abbreviation defined in the associated specification if one exists. | String | required | |
pay-quantity |
Pay Item quantity | String | required | |
pay-item-note |
A note used to further describe the pay item. | String | optional | |
specification-url |
The world wide web address associated with the specification or specification section that provides additional information realted to the Pay Item. | String | optional | |
pay-item-code-6 |
The code used to describe the pay item often associated with construction standards or specifications developed by an owner agency. | String | required | |
pay-item-description-7 |
A description of the pay item code. | String | required | |
pay-item-unit-of-measure-8 |
The unit of measure associated with the pay item (LF, CY, LS, etc.). Use the unit abbreviation defined in the associated specification if one exists. | String | required | |
pay-quantity-9 |
Pay Item quantity | String | required | |
pay-item-note-10 |
A note used to further describe the pay item. | String | optional | |
specification-url-11 |
The world wide web address associated with the specification or specification section that provides additional information realted to the Pay Item. | String | optional | |
pay-item-code-12 |
The code used to describe the pay item often associated with construction standards or specifications developed by an owner agency. | String | required | |
pay-item-description-13 |
A description of the pay item code. | String | required | |
pay-item-unit-of-measure-14 |
The unit of measure associated with the pay item (LF, CY, LS, etc.). Use the unit abbreviation defined in the associated specification if one exists. | String | required | |
pay-quantity-15 |
Pay Item quantity | String | required | |
pay-item-note-16 |
A note used to further describe the pay item. | String | optional | |
specification-url-17 |
The world wide web address associated with the specification or specification section that provides additional information realted to the Pay Item. | String | optional | |
pay-item-code-18 |
The code used to describe the pay item often associated with construction standards or specifications developed by an owner agency. | String | required | |
pay-item-description-19 |
A description of the pay item code. | String | required | |
pay-item-unit-of-measure-20 |
The unit of measure associated with the pay item (LF, CY, LS, etc.). Use the unit abbreviation defined in the associated specification if one exists. | String | required | |
pay-quantity-21 |
Pay Item quantity | String | required | |
pay-item-note-22 |
A note used to further describe the pay item. | String | optional | |
specification-url-23 |
The world wide web address associated with the specification or specification section that provides additional information realted to the Pay Item. | String | optional |
Requirements
- All Top Layers must have the property Pay Item Code in the set Pay Item Information.
- All Top Layers must have the property Pay Item Description in the set Pay Item Information.
- All Top Layers must have the property Pay Item Unit of Measure in the set Pay Item Information.
- All Top Layers must have the property Pay Quantity in the set Pay Item Information.
- All Top Layers may have the property Pay Item Note in the set Pay Item Information.
- All Top Layers may have the property Specification URL in the set Pay Item Information.
- All Top Layers must have the property Pay Item Code in the set Pay Item Information.
- All Top Layers must have the property Pay Item Description in the set Pay Item Information.
- All Top Layers must have the property Pay Item Unit of Measure in the set Pay Item Information.
- All Top Layers must have the property Pay Quantity in the set Pay Item Information.
- All Top Layers may have the property Pay Item Note in the set Pay Item Information.
- All Top Layers may have the property Specification URL in the set Pay Item Information.
- All Top Layers must have the property Pay Item Code in the set Pay Item Information.
- All Top Layers must have the property Pay Item Description in the set Pay Item Information.
- All Top Layers must have the property Pay Item Unit of Measure in the set Pay Item Information.
- All Top Layers must have the property Pay Quantity in the set Pay Item Information.
- All Top Layers may have the property Pay Item Note in the set Pay Item Information.
- All Top Layers may have the property Specification URL in the set Pay Item Information.
- All Top Layers must have the property Pay Item Code in the set Pay Item Information.
- All Top Layers must have the property Pay Item Description in the set Pay Item Information.
- All Top Layers must have the property Pay Item Unit of Measure in the set Pay Item Information.
- All Top Layers must have the property Pay Quantity in the set Pay Item Information.
- All Top Layers may have the property Pay Item Note in the set Pay Item Information.
- All Top Layers may have the property Specification URL in the set Pay Item Information.
Property Details
Pay Item Code
The code used to describe the pay item often associated with construction standards or specifications developed by an owner agency. Synonyms: Bid Item Notes: Pay item information associated with a group of modeled objects or work not associated with modeled objects may be assigned to element assemblies or spatial containers (e.g. IfcRoad, IfcRoadPart, IfcElementAssembly). Requirement: All Top Layers must have the property Pay Item Code in the set Pay Item Information.
Pay Item Description
A description of the pay item code. Synonyms: Bid Item Description Requirement: All Top Layers must have the property Pay Item Description in the set Pay Item Information.
Pay Item Unit of Measure
The unit of measure associated with the pay item (LF, CY, LS, etc.). Use the unit abbreviation defined in the associated specification if one exists. Synonyms: Bid Item Unit Requirement: All Top Layers must have the property Pay Item Unit of Measure in the set Pay Item Information.
Pay Quantity
Pay Item quantity Synonyms: Bid Item Quantity Notes: Discepancies between values shown here and QTO based quantities may exist. This property is intended to govern over QTO based quantities. Requirement: All Top Layers must have the property Pay Quantity in the set Pay Item Information.
Pay Item Note
A note used to further describe the pay item. Synonyms: Bid Item Notes Requirement: All Top Layers may have the property Pay Item Note in the set Pay Item Information.
Specification URL
The world wide web address associated with the specification or specification section that provides additional information realted to the Pay Item. Requirement: All Top Layers may have the property Specification URL in the set Pay Item Information.
Pay Item Code
The code used to describe the pay item often associated with construction standards or specifications developed by an owner agency. Synonyms: Bid Item Notes: Pay item information associated with a group of modeled objects or work not associated with modeled objects may be assigned to element assemblies or spatial containers (e.g. IfcRoad, IfcRoadPart, IfcElementAssembly). Requirement: All Top Layers must have the property Pay Item Code in the set Pay Item Information.
Pay Item Description
A description of the pay item code. Synonyms: Bid Item Description Requirement: All Top Layers must have the property Pay Item Description in the set Pay Item Information.
Pay Item Unit of Measure
The unit of measure associated with the pay item (LF, CY, LS, etc.). Use the unit abbreviation defined in the associated specification if one exists. Synonyms: Bid Item Unit Requirement: All Top Layers must have the property Pay Item Unit of Measure in the set Pay Item Information.
Pay Quantity
Pay Item quantity Synonyms: Bid Item Quantity Notes: Discepancies between values shown here and QTO based quantities may exist. This property is intended to govern over QTO based quantities. Requirement: All Top Layers must have the property Pay Quantity in the set Pay Item Information.
Pay Item Note
A note used to further describe the pay item. Synonyms: Bid Item Notes Requirement: All Top Layers may have the property Pay Item Note in the set Pay Item Information.
Specification URL
The world wide web address associated with the specification or specification section that provides additional information realted to the Pay Item. Requirement: All Top Layers may have the property Specification URL in the set Pay Item Information.
Pay Item Code
The code used to describe the pay item often associated with construction standards or specifications developed by an owner agency. Synonyms: Bid Item Notes: Pay item information associated with a group of modeled objects or work not associated with modeled objects may be assigned to element assemblies or spatial containers (e.g. IfcRoad, IfcRoadPart, IfcElementAssembly). Requirement: All Top Layers must have the property Pay Item Code in the set Pay Item Information.
Pay Item Description
A description of the pay item code. Synonyms: Bid Item Description Requirement: All Top Layers must have the property Pay Item Description in the set Pay Item Information.
Pay Item Unit of Measure
The unit of measure associated with the pay item (LF, CY, LS, etc.). Use the unit abbreviation defined in the associated specification if one exists. Synonyms: Bid Item Unit Requirement: All Top Layers must have the property Pay Item Unit of Measure in the set Pay Item Information.
Pay Quantity
Pay Item quantity Synonyms: Bid Item Quantity Notes: Discepancies between values shown here and QTO based quantities may exist. This property is intended to govern over QTO based quantities. Requirement: All Top Layers must have the property Pay Quantity in the set Pay Item Information.
Pay Item Note
A note used to further describe the pay item. Synonyms: Bid Item Notes Requirement: All Top Layers may have the property Pay Item Note in the set Pay Item Information.
Specification URL
The world wide web address associated with the specification or specification section that provides additional information realted to the Pay Item. Requirement: All Top Layers may have the property Specification URL in the set Pay Item Information.
Pay Item Code
The code used to describe the pay item often associated with construction standards or specifications developed by an owner agency. Synonyms: Bid Item Notes: Pay item information associated with a group of modeled objects or work not associated with modeled objects may be assigned to element assemblies or spatial containers (e.g. IfcRoad, IfcRoadPart, IfcElementAssembly). Requirement: All Top Layers must have the property Pay Item Code in the set Pay Item Information.
Pay Item Description
A description of the pay item code. Synonyms: Bid Item Description Requirement: All Top Layers must have the property Pay Item Description in the set Pay Item Information.
Pay Item Unit of Measure
The unit of measure associated with the pay item (LF, CY, LS, etc.). Use the unit abbreviation defined in the associated specification if one exists. Synonyms: Bid Item Unit Requirement: All Top Layers must have the property Pay Item Unit of Measure in the set Pay Item Information.
Pay Quantity
Pay Item quantity Synonyms: Bid Item Quantity Notes: Discepancies between values shown here and QTO based quantities may exist. This property is intended to govern over QTO based quantities. Requirement: All Top Layers must have the property Pay Quantity in the set Pay Item Information.
Pay Item Note
A note used to further describe the pay item. Synonyms: Bid Item Notes Requirement: All Top Layers may have the property Pay Item Note in the set Pay Item Information.
Specification URL
The world wide web address associated with the specification or specification section that provides additional information realted to the Pay Item. Requirement: All Top Layers may have the property Specification URL in the set Pay Item Information.