Exchange Requirement: Pedestrian Travelway
Name
Pedestrian Travelway
Identifier
er_pedestrian-travelway
Change Log
| Date (yyyy-mm-dd) | Action | Author (email) |
|---|---|---|
| 2025-12-09 | Initial draft | AI Generated |
Project Stage
Select the applicable project stage(s); remove rows that do not apply.
| Code | Stage |
|---|---|
| 0 | Portfolio requirements |
| 1 | Conception of need |
| 2 | Outline feasibility |
| 3 | Substantive feasibility |
| 4 | Outline conceptual design |
| 5 | Full conceptual design |
| 6 | Coordinated design and procurement |
| 7 | Production information |
| 8 | Construction |
| 9 | Operation and maintenance |
| 10 | Disposal |
Overview
Provide a textual overview of the exchange requirement under the headings Scope, General Description and Information Description. Keep it non-technical and aimed at an executive audience.
Scope
The scope of this exchange requirement is to enable the exchange of pedestrian travelway information including identification, spatial location (alignment-based and coordinate-based), facility type classification (sidewalk, path, buffer), width, surface material, and ADA compliance parameters necessary for accessible pedestrian network design.
General Description
Pedestrian travelways provide dedicated facilities for pedestrian circulation parallel to or separated from roadways, including sidewalks, shared-use paths, and buffer zones. This exchange requirement captures both the geometric definition and the specification properties necessary for design coordination, accessibility verification, and connectivity planning. The information model supports three primary facility types: sidewalks (adjacent to roadway), paths (separated multi-use facilities), and buffers (landscaped separation zones). Each type has specific width, surface, and accessibility requirements defined by ADA and state standards.
Information Description
The information exchanged through this requirement includes the following parts:
- Identification
- Alignment Data Linear
- State Plane Coordinates Linear
- LRS Data Linear
- GPS Coordinates Linear
- Joint
- Pedestrian Travelway Layout
- Reinforcement
- Pay Item Information
Information Requirements
Preconditions
Before exchanging pedestrian travelway information, the following information must be available: Alignment and corridor geometry must be established (see Exchange Requirement: Horizontal Alignment, Exchange Requirement: Corridor). Project coordinate system must be defined. Right-of-way boundaries must be defined. ADA design criteria including minimum clear width and cross-slope requirements must be identified. Complete streets policy requirements must be established.
Parts
A part is a set of information that achieves a specific purpose or function within this exchange requirement (for example: Select Object, Assign To Group, Associate Library Reference). An exchange requirement is expected to consist of many parts.
Repeat the following block for each part.
Part: Identification
- Purpose: Uniquely identify each Pedestrian Travelway element for database management, field verification, and asset tracking.
Concept: Assign Unique Identifiers
- Purpose: Establish unique identification for each Pedestrian Travelway instance to support data management and asset tracking.
Provide a table with the set of information requirements for each concept. Extend the table as needed.
| Idea | Explanation |
|---|---|
| Object ID | Unique ID assigned to each asset in database (Type: STRING, Cardinality: R) |
| Feature ID | Specific point, linear, and surface designation (Type: STRING, Cardinality: O) |
| Feature Description | Specific point, linear, and surface detailed description (Type: STRING, Cardinality: O) |
| Survey Feature Code | Short abbreviation surveyors use in the field to identify and describe physical features and data points encountered (Type: STRING, Cardinality: O) |
| Object ID | Unique ID assigned to each asset in database (Type: STRING, Cardinality: R) |
| Feature ID | Specific point, linear, and surface designation (Type: STRING, Cardinality: O) |
| Feature Description | Specific point, linear, and surface detailed description (Type: STRING, Cardinality: O) |
| Survey Feature Code | Short abbreviation surveyors use in the field to identify and describe physical features and data points encountered (Type: STRING, Cardinality: O) |
| Object ID | Unique ID assigned to each asset in database (Type: STRING, Cardinality: R) |
| Feature ID | Specific point, linear, and surface designation (Type: STRING, Cardinality: O) |
| Feature Description | Specific point, linear, and surface detailed description (Type: STRING, Cardinality: O) |
| Survey Feature Code | Short abbreviation surveyors use in the field to identify and describe physical features and data points encountered (Type: STRING, Cardinality: O) |
Part: Alignment Data Linear
- Purpose: Reference the Pedestrian Travelway location to the project alignment and corridor system using stationing and offset measurements.
Concept: Reference to Alignment System
- Purpose: Establish the relationship between Pedestrian Travelway elements and the roadway alignment/corridor framework.
Provide a table with the set of information requirements for each concept. Extend the table as needed.
| Idea | Explanation |
|---|---|
| Alignment ID Reference | Alignment ID that is referenced for element layout (Type: STRING, Cardinality: R) |
| Corridor ID Reference | Corridor ID that is referenced for element layout (Type: STRING, Cardinality: R) |
| Station Begin | Station of linear location - begin (Type: REAL, Units: Stationing, Cardinality: R) |
| Station Offset Begin | Offset of linear location - begin (Type: REAL, Units: Feet, Cardinality: R) |
| Station End | Station of linear location - end (Type: REAL, Units: Stationing, Cardinality: R) |
| Station Offset End | Offset of linear location - end (Type: REAL, Units: Feet, Cardinality: R) |
| Reference Point Location | Placement of point for offset (i.e. gutterline for traffic barrier feature) (Type: STRING, Cardinality: R) |
| Alignment ID Reference | Alignment ID that is referenced for element layout (Type: STRING, Cardinality: R) |
| Corridor ID Reference | Corridor ID that is referenced for element layout (Type: STRING, Cardinality: R) |
| Station Begin | Station of linear location - begin (Type: REAL, Units: Stationing, Cardinality: R) |
| Station Offset Begin | Offset of linear location - begin (Type: REAL, Units: Feet, Cardinality: R) |
| Station End | Station of linear location - end (Type: REAL, Units: Stationing, Cardinality: R) |
| Station Offset End | Offset of linear location - end (Type: REAL, Units: Feet, Cardinality: R) |
| Reference Point Location | Placement of point for offset (i.e. gutterline for traffic barrier feature) (Type: STRING, Cardinality: R) |
| Alignment ID Reference | Alignment ID that is referenced for element layout (Type: STRING, Cardinality: R) |
| Corridor ID Reference | Corridor ID that is referenced for element layout (Type: STRING, Cardinality: R) |
| Station Begin | Station of linear location - begin (Type: REAL, Units: Stationing, Cardinality: R) |
| Station Offset Begin | Offset of linear location - begin (Type: REAL, Units: Feet, Cardinality: R) |
| Station End | Station of linear location - end (Type: REAL, Units: Stationing, Cardinality: R) |
| Station Offset End | Offset of linear location - end (Type: REAL, Units: Feet, Cardinality: R) |
| Reference Point Location | Placement of point for offset (i.e. gutterline for traffic barrier feature) (Type: STRING, Cardinality: R) |
Part: State Plane Coordinates Linear
- Purpose: Provide absolute positioning using state plane coordinate system for survey control and GIS integration.
Concept: Absolute Coordinate Positioning
- Purpose: Define Pedestrian Travelway location using state plane coordinates independent of alignment references.
Provide a table with the set of information requirements for each concept. Extend the table as needed.
| Idea | Explanation |
|---|---|
| Northing Begin | The “Y” values of coordinates represented on a plane coordinate system - Begin (Linear) (Type: REAL, Units: Feet, Cardinality: R) |
| Easting Begin | The “X” values of coordinates represented on a plane coordinate system - Begin (Linear) (Type: REAL, Units: Feet, Cardinality: R) |
| Northing End | The “Y” values of coordinates represented on a plane coordinate system - End (Linear) (Type: REAL, Units: Feet, Cardinality: R) |
| Easting End | The “X” values of coordinates represented on a plane coordinate system - End (Linear) (Type: REAL, Units: Feet, Cardinality: R) |
| Northing Begin | The “Y” values of coordinates represented on a plane coordinate system - Begin (Linear) (Type: REAL, Units: Feet, Cardinality: R) |
| Easting Begin | The “X” values of coordinates represented on a plane coordinate system - Begin (Linear) (Type: REAL, Units: Feet, Cardinality: R) |
| Northing End | The “Y” values of coordinates represented on a plane coordinate system - End (Linear) (Type: REAL, Units: Feet, Cardinality: R) |
| Easting End | The “X” values of coordinates represented on a plane coordinate system - End (Linear) (Type: REAL, Units: Feet, Cardinality: R) |
| Northing Begin | The “Y” values of coordinates represented on a plane coordinate system - Begin (Linear) (Type: REAL, Units: Feet, Cardinality: R) |
| Easting Begin | The “X” values of coordinates represented on a plane coordinate system - Begin (Linear) (Type: REAL, Units: Feet, Cardinality: R) |
| Northing End | The “Y” values of coordinates represented on a plane coordinate system - End (Linear) (Type: REAL, Units: Feet, Cardinality: R) |
| Easting End | The “X” values of coordinates represented on a plane coordinate system - End (Linear) (Type: REAL, Units: Feet, Cardinality: R) |
Part: LRS Data Linear
- Purpose: Support integration with Linear Reference Systems (LRS) for asset management and maintenance operations.
Concept: LRS Integration
- Purpose: Enable referencing of Pedestrian Travelway assets within agency LRS databases.
Provide a table with the set of information requirements for each concept. Extend the table as needed.
| Idea | Explanation |
|---|---|
| Postmile Begin | Mile post of point location - begin (Type: REAL, Units: Mile, Cardinality: O) |
| LRS Offset Begin | Linear Reference System offset of point location - begin (Type: REAL, Units: Feet, Cardinality: O) |
| Postmile End | Mile post of point location - end (Type: REAL, Units: Mile, Cardinality: O) |
| LRS Offset End | Linear Reference System offset of point location - end (Type: REAL, Units: Feet, Cardinality: O) |
| Postmile Begin | Mile post of point location - begin (Type: REAL, Units: Mile, Cardinality: O) |
| LRS Offset Begin | Linear Reference System offset of point location - begin (Type: REAL, Units: Feet, Cardinality: O) |
| Postmile End | Mile post of point location - end (Type: REAL, Units: Mile, Cardinality: O) |
| LRS Offset End | Linear Reference System offset of point location - end (Type: REAL, Units: Feet, Cardinality: O) |
| Postmile Begin | Mile post of point location - begin (Type: REAL, Units: Mile, Cardinality: O) |
| LRS Offset Begin | Linear Reference System offset of point location - begin (Type: REAL, Units: Feet, Cardinality: O) |
| Postmile End | Mile post of point location - end (Type: REAL, Units: Mile, Cardinality: O) |
| LRS Offset End | Linear Reference System offset of point location - end (Type: REAL, Units: Feet, Cardinality: O) |
Part: GPS Coordinates Linear
- Purpose: Provide GPS-based location data for field verification and mobile data collection.
Concept: GPS Positioning
- Purpose: Support field crews with GPS coordinates for location verification.
Provide a table with the set of information requirements for each concept. Extend the table as needed.
| Idea | Explanation |
|---|---|
| Latitude Begin | Latitude of linear location - begin (Type: REAL, Cardinality: O) |
| Longitude Begin | Longitude of point location - begin (Type: REAL, Cardinality: O) |
| Latitude End | Latitude of linear location - end (Type: REAL, Cardinality: O) |
| Longitude End | Longitude of point location - end (Type: REAL, Cardinality: O) |
| Control Points Benchmarks | Reference points with known coordinates and/or elevations, used to create a consistent horizontal and vertical datums for accurate coordination of highway right of way and private property boundaries and existing features for construction projects. (Type: STRING, Cardinality: O) |
| GPS Notes | Notes referring to GPS location data (Type: STRING, Cardinality: O) |
| Latitude Begin | Latitude of linear location - begin (Type: REAL, Cardinality: O) |
| Longitude Begin | Longitude of point location - begin (Type: REAL, Cardinality: O) |
| Latitude End | Latitude of linear location - end (Type: REAL, Cardinality: O) |
| Longitude End | Longitude of point location - end (Type: REAL, Cardinality: O) |
| Control Points Benchmarks | Reference points with known coordinates and/or elevations, used to create a consistent horizontal and vertical datums for accurate coordination of highway right of way and private property boundaries and existing features for construction projects. (Type: STRING, Cardinality: O) |
| GPS Notes | Notes referring to GPS location data (Type: STRING, Cardinality: O) |
| Latitude Begin | Latitude of linear location - begin (Type: REAL, Cardinality: O) |
| Longitude Begin | Longitude of point location - begin (Type: REAL, Cardinality: O) |
| Latitude End | Latitude of linear location - end (Type: REAL, Cardinality: O) |
| Longitude End | Longitude of point location - end (Type: REAL, Cardinality: O) |
| Control Points Benchmarks | Reference points with known coordinates and/or elevations, used to create a consistent horizontal and vertical datums for accurate coordination of highway right of way and private property boundaries and existing features for construction projects. (Type: STRING, Cardinality: O) |
| GPS Notes | Notes referring to GPS location data (Type: STRING, Cardinality: O) |
Part: Joint
- Purpose: Describe the purpose of the Joint part
Concept: Joint Information
- Purpose: Describe the purpose of capturing Joint information
Provide a table with the set of information requirements for each concept. Extend the table as needed.
| Idea | Explanation |
|---|---|
| Joint Type | The classification of joints formed where two sections of pavement or structural material meet, based on their shape, size, and functional purpose. Common types include contraction joints, expansion joints, and construction joints, which help control cracking and accommodate movement. (Type: STRING, Cardinality: O) |
| Maximum Joint Interval | The greatest permissible spacing between consecutive pavement joints, as specified by design standards, to control cracking and accommodate material movement. (Type: REAL, Units: Feet, Cardinality: O) |
| Joint Type | The classification of joints formed where two sections of pavement or structural material meet, based on their shape, size, and functional purpose. Common types include contraction joints, expansion joints, and construction joints, which help control cracking and accommodate movement. (Type: STRING, Cardinality: O) |
| Maximum Joint Interval | The greatest permissible spacing between consecutive pavement joints, as specified by design standards, to control cracking and accommodate material movement. (Type: REAL, Units: Feet, Cardinality: O) |
| Joint Type | The classification of joints formed where two sections of pavement or structural material meet, based on their shape, size, and functional purpose. Common types include contraction joints, expansion joints, and construction joints, which help control cracking and accommodate movement. (Type: STRING, Cardinality: O) |
| Maximum Joint Interval | The greatest permissible spacing between consecutive pavement joints, as specified by design standards, to control cracking and accommodate material movement. (Type: REAL, Units: Feet, Cardinality: O) |
Part: Pedestrian Travelway Layout
- Purpose: Describe the purpose of the Pedestrian Travelway Layout part
Concept: Pedestrian Travelway Layout Information
- Purpose: Describe the purpose of capturing Pedestrian Travelway Layout information
Provide a table with the set of information requirements for each concept. Extend the table as needed.
| Idea | Explanation |
|---|---|
| Total Pedestrian Tralway Width | The horizontal distance from one edge of the sidewalk to the opposite edge, measured perpendicular to the roadway centerline. This dimension determines pedestrian space and is critical for accessibility and design standards. (Type: REAL, Units: Feet, Cardinality: R) |
| Height at Edge of Pavement | Indicates the adjacent pavement distance above the top of the gutter pan, typically greater than zero in asphalt pavements. (Type: REAL, Units: Inches, Cardinality: O) |
| Total Pedestrian Tralway Width | The horizontal distance from one edge of the sidewalk to the opposite edge, measured perpendicular to the roadway centerline. This dimension determines pedestrian space and is critical for accessibility and design standards. (Type: REAL, Units: Feet, Cardinality: R) |
| Height at Edge of Pavement | Indicates the adjacent pavement distance above the top of the gutter pan, typically greater than zero in asphalt pavements. (Type: REAL, Units: Inches, Cardinality: O) |
| Total Pedestrian Tralway Width | The horizontal distance from one edge of the sidewalk to the opposite edge, measured perpendicular to the roadway centerline. This dimension determines pedestrian space and is critical for accessibility and design standards. (Type: REAL, Units: Feet, Cardinality: R) |
| Height at Edge of Pavement | Indicates the adjacent pavement distance above the top of the gutter pan, typically greater than zero in asphalt pavements. (Type: REAL, Units: Inches, Cardinality: O) |
Part: Reinforcement
- Purpose: Describe the purpose of the Reinforcement part
Concept: Reinforcement Information
- Purpose: Describe the purpose of capturing Reinforcement information
Provide a table with the set of information requirements for each concept. Extend the table as needed.
| Idea | Explanation |
|---|---|
| Reinforcement | The indication of whether an object includes reinforcement. (Type: BOOLEAN, Cardinality: O) |
| Reinforcement | The indication of whether an object includes reinforcement. (Type: BOOLEAN, Cardinality: O) |
| Reinforcement | The indication of whether an object includes reinforcement. (Type: BOOLEAN, Cardinality: O) |
Part: Pay Item Information
- Purpose: Provide construction contract administration data for cost estimation and payment processing.
Concept: Contract Pay Items
- Purpose: Define pay items associated with Pedestrian Travelway construction for quantity tracking and contractor payment.
Provide a table with the set of information requirements for each concept. Extend the table as needed.
| Idea | Explanation |
|---|---|
| Pay Item Code | The code used to describe the pay item often associated with construction standards or specifications developed by an owner agency. (Type: STRING, Cardinality: R) |
| Pay Item Description | A description of the pay item code. (Type: STRING, Cardinality: R) |
| Pay Item Unit of Measure | The unit of measure associated with the pay item (LF, CY, LS, etc.). Use the unit abbreviation defined in the associated specification if one exists. (Type: STRING, Cardinality: R) |
| Pay Quantity | Pay Item quantity (Type: STRING, Cardinality: R) |
| Pay Item Note | A note used to further describe the pay item. (Type: STRING, Cardinality: O) |
| Specification URL | The world wide web address associated with the specification or specification section that provides additional information realted to the Pay Item. (Type: STRING, Cardinality: O) |
| Pay Item Code | The code used to describe the pay item often associated with construction standards or specifications developed by an owner agency. (Type: STRING, Cardinality: R) |
| Pay Item Description | A description of the pay item code. (Type: STRING, Cardinality: R) |
| Pay Item Unit of Measure | The unit of measure associated with the pay item (LF, CY, LS, etc.). Use the unit abbreviation defined in the associated specification if one exists. (Type: STRING, Cardinality: R) |
| Pay Quantity | Pay Item quantity (Type: STRING, Cardinality: R) |
| Pay Item Note | A note used to further describe the pay item. (Type: STRING, Cardinality: O) |
| Specification URL | The world wide web address associated with the specification or specification section that provides additional information realted to the Pay Item. (Type: STRING, Cardinality: O) |
| Pay Item Code | The code used to describe the pay item often associated with construction standards or specifications developed by an owner agency. (Type: STRING, Cardinality: R) |
| Pay Item Description | A description of the pay item code. (Type: STRING, Cardinality: R) |
| Pay Item Unit of Measure | The unit of measure associated with the pay item (LF, CY, LS, etc.). Use the unit abbreviation defined in the associated specification if one exists. (Type: STRING, Cardinality: R) |
| Pay Quantity | Pay Item quantity (Type: STRING, Cardinality: R) |
| Pay Item Note | A note used to further describe the pay item. (Type: STRING, Cardinality: O) |
| Specification URL | The world wide web address associated with the specification or specification section that provides additional information realted to the Pay Item. (Type: STRING, Cardinality: O) |